The type and quality of the chemicals used in your pool or spa will have a direct correlation on the clarity and sanitation of the water. Buckhead Pool Service uses only Grade A, industry approved chemicals purchased from established and respected manufacturers.

As a full service swimming pool and spa company we deliver, check and add chemicals to your pool during our service visits. Maintaining the correct chemical balance is extremely important to ensure safe swimming conditions and prevent damage to the pool or spa surface.

The chemicals we use contain limited fillers so dissolving quickly and leave little or no residue. This differs from chemicals that can be purchased from mass retailers and discount stores.

Chemicals should always be stored safely and with lids tightly secured. Small children, pets and animals should be kept away from chemical containers at all times.

Water chemistry is of primary importance and ideal parameters should be maintained. The following readings should be generated to ensure sanitized and healthy water:

Chlorine residual: 1.0-3.0 ppm
Total Alkalinity: 80-150 ppm
PH: 7.4-7.6
Hardness: 200-400 ppm
Total dissolved solids: Less than 2000 ppm
Cyanuric acid: 30-80 ppm

Temperature, wind, evaporation and bather load all play a part in altering the chemical balance. Because of these variables the chemical balance should be checked at least once a week.

Buckhead Pool Service’s Pool Maintenance and Water Chemistry Division will not only pamper your pool with top quality service but ensure that the correct chemical balance is maintained at all times.

For more information on chemicals or service to your account please call or email our office.